Laboratory Oven

Hi-Tech make Laboratory Oven (Memmert type) is specially designed to meet exact temperature profile by ensuring uniform homogeneous hot air mixture.

Features & Benefits

•  Air circulating fan is fitted in the chambers to ensure forced air circulation.
•  Triple Body Construction
•  Electrically Heated (Forced convection)
•  Precise Temperature controlled by PID Controller with timer
•  Temperature range upto 300℃ (Upgradable upto 500℃)
•  Internal Air Circulation with blowers.
•  Standard & GMP variants available.

Tray Dryer

Hi-Tech make Tray Drier are designed for drying wetproducts of the crude drugs, chemical products or the granules etc.

Features

•  Sturdy Triple body construction.
•  Highly effective recirculating air system provided.
•  Temperature upto 400
•  Standard & GMP variants available.
•  192 Standard Trays of Dimensions 24”x 24” can be accumulated.

Drum Heater

Introduction

Hi-Tech make Drum Heater are designed to providepractical & efficient means of freeze protection, viscocity control & ease of maintenance in elevated temperature.

Features

•  Used to effectively heat Standard Drum of 200 ltr
•  Total 12 nos. of U shaped heaters mounted on a Vertical heating system
•  Digital Temperature Controller for precise monitoring of Temperature.
•  Flameproof & Non-Flameproof variants available.
•  12kW Power Ratings
•  The unit is provided with castrol wheel for easy mobility.

Bacteriological Incubator

Introduction

Hi-Tech make Bacteriological Incubator are designed to achieveprecise incubation temperature of different laboratory samples for optimizing reaction stability.Chamber is designed as per FDA & ICHQIA compliancestandard & have reputation for reliability, quality & performance for research lab, Engineering Lab, Pharmaceutical lab, Clinical Lab, Microbiological lab etc.

Features

•  Temperature Range 30°C to 65°C
•  Highly effective recirculating air system is provide
•  Glass Door for sample viewing
•  High Density Glasswool Insulation.
•  Interior Illumination provided.

Oil Bath

Introduction

“HI-TECH” make Constant Temperature Oil Bath are designed and fabricated to suit various I.S. standards application in the growing field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and Various Industries.

Features

•  Temperature Range 50C above ambient to 250.00C.

Vacuum Oven

Hi-Tech make Vacuum Oven are designed to carry out processes such as annealing, brazing, sintering & heat treatment with high consistency & contamination, used in wide range of applications in both production industries & research laboratories . The temperature ranges from Room Temperature to 250°C.

Construction

•  Double walled , gap between walls filled with glass-wool Insulation.
•  Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.
•  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel.
•  Microprocessor based PID temp. controller with auto tune facility for precise control of temperature .

•  Temperature Range 5.0 °C above ambient to 250.0 °C. Accuracy +/- 0.5 °C. Uniformity +/- 1.0 °C
•  Temperature Display : Digital LED 3 ½ digit, Resolution 0.1 °C
•  Heating system: Heating coil mounted on fibre glass cloth wounded on the chamber.

Muffle Furnace

SPECIFICATIONS

•  Type of Furnace : Electrically Heated Muffle furnace.
•  Working Temp Range : 5 degree above ambient to 900°C
•  Maximum Working temperature : 1000°C for Max 1 hr only
•  Temp Accuracy : +/- 3°C .
•  Temp. Uniformity : +/- 5°C throughout the chamber.
•  Muffle is made of siliminite.
•  The lining of the door is done by High quality Mythan bricks.
•  Temp. Display : Digital LED 3 ½ digit , Resolution 1°C.
•  Back Port venturi system for quick exhaust.
•  A grade K type sensor used for better accuracy.
•  No contact of Hot surface to body for heat loss prevention.
•  Front Hole for observation with shutter Knob.

Tube Furnace

Hi-Tech make Tube Furnace are designed to conduct synthesis & purifications of inorganic compounds thermolysis reactions by means of electric heating. Innert Tube Vacuum & Innert Tube Furnace used for vacuum & inert atmosphere for sintering process & other application.

Construction

•  Temperature Range - 5℃ above ambient to 1400℃. Heating zone length - 300mm.
•  Triple walled construction, thermally insulated with cooling system for better performance during continuous operation.
•  Abrasion resistant tube to support heavy loads.
•  Quartz tube ID :- Approx. 50mm(for Hi-Tech 28a series) 75mm(for Hi-Tech 28b series) & 100mm(for Hi-Tech 28c series).

•  Type of furnace: -Programmable electrically heated single zone tube furnace.
•  Tube material: quartz with end flanges with silicon/whiten gasket.
•  Temp. Is controlled by microprocessor based PID temp. Controller, programmable up to 8 steps /segments per programed of ramp/soak profile.
•  8Heating rate : programmable heating rate up to 5 to 25 ℃ /min

Water Bath

Introduction

The Purpose of water bath is to incubate sample in a water bath at constant temperature over period of time. Hence constant temperature water bath serves as an important Quality attribute of the product.

HI-TECH Make GMP constant temperature water bath are especially built to Pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA/ICH guidelines for long term , intermediate and accelerated stability studies.

Features

•  Temperature Range 5.0 °C above ambient to 95 °C. Accuracy +/- 2 °C.
•  Temperature Display : Digital LED 3 digit, Resolution 1°C.
•  Heating system: U shaped Nichrome wire heater in SS Sheathing.

Construction

•  Double walled , gap between walls filled with High grade glass wool Insulation.
•  Standard Model : Stainless steel Mirror polished chamber and heavy guage Powder- coated CRC exterior.
•  GMP Model : Stainless steel Mirror polished chamber and exterior of dull finish stainless steel
•  Microprocessor based PID temp. controller with auto tune facility for precise control of temperature.
•  Alarm : Audio visual alarm if temperature deviates from the preset temperature.

Viscosity Bath

Introduction

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures in Viscosity bath.Conforms to the specifications of : ASTM D445, D2532, D6074, D6158, IP 71, ISO 3104, DIN 51550, FTM 791-305.

Features

•  Viscosity Bath to accomodate 6 Viscometers at a time.
•  Temperature Range - Ambient to 120℃. (Upgradable upto 180℃.)
•  Motorised Stirrer for Temperature Uniformity throughout the chamber - 2℃.
•  PID Temperature Controller for Precise Temperature Control.
•  Viscometers Tube Holders provided along with the Equipment.

Dry Heating Block And C. O. D. Digestor

Features

•  Heating Block :- Aluminium(HE 30) Solid Block Heater provided for uniform heating
•  Working Temperature - 300℃.
•  Standard Hole Diameter of 40mm provided to accommodate 6 or 12 nos. 38mm dia Test-Tubes.
•  PID Temperature Controller for Precise Temperature Control.
•  Customized Hole Size available on request.

Refractory Furnace

Features

•  Refractory Furnaces with temperature range from 600℃ to 1200℃.
•  High quality ceramic brick lining for minimal heat loss and Maximum insulation.
•  Kanthal A1 grade heater wire for optimal heating.
•  A grade K-type temperature sensor used for better accuracy.
•  Type of Furnace:- Electrically Heated Muffle furnace.
•  Working Temp Range:- 5 degree above ambient to 1300°C
•  Maximum Working temperature:- 1400°C for Max 1 hr only
•  Back Port venturi system for quick exhaust.

Rotary Tube Furnace

HLT-RTF is a two zones rotary tube furnace, designed DC variable speed control and temperature control system. The rotary tube furnace can be for industrial or laboratory use and is cost effective for Research and Development environments.

Features

•  High purity Alumina fibrous insulation for effective energy saving.
•  Double shell constructed structure with 3 cooling fans.
•  Geared DC motor drives Quartz tube with variable speed of 0-10 RPM.
•  30° tilting of furnace with use of electricity.
•  Rapid cooling and easy operation due to split cover.
•  One pair of S.S. sealing flange with needle valves and the rotatable gas connector is included.
•  High-Temperature stainless steel alloy tube with Max. working temperature at 900°C is available upon request.
•  Vacuum: The tube furnaces with quartz tube are deigned for using under vacuum and low pressure.
•  The concept of continuous power feeding and processing can be realized by the use of Magnetic Fluid Sealed Swivel
•  Coupling in line with Volumetric Feeder and Rotary Furnace.